Outlook 2010 - stuck on "loading profile"
New Mailbox Database Creation in Exchange 2010
Hi, Guys.
Need your assistance on this.
Could you please let me know how to create a new mailbox database in Exchange 2010 using Exchange shell specifying also its database folder path and log folder path? What do you need to consider when you create a new mailbox database? After creating this new mailbox database, how would you create a passive copy of this? Please advise.
Thank you.
Use Exchange Auditing to monitor when e-mails are read
Disabled Mailbox is not showing in disconnected Mailbox area
Hi everyone,
We have Exchange server 2010 sp1 in our organization, when we disable a mail box and after 5 mins or 1 day again i want to connect this mailbox with AD user then it is not searhable in the Disconnected mailbox area.
Kindly let me know the best solution for this...
Regards
Sunny Chauhan
Avoiding 'sent on behalf of' message
Hi
SBS 2011/Exchange 2010.
I have added a second account to Outlook 2010 through the Advanced tab. The issue is when I send email form second account it says 'sent on behalf of' in the sent message. is there a way to skip this message?
Thanks
Regards
is exchange 2010 compatible with outlook 365
iOS resync with Exchange 2010
We have different iOS users (iPhone, iPad, etc) that sporadically experience a complete email resync. I have seen articles that talk about this being caused by ActiveSync "500" errors and Apple basically believing the data on the local device is bad, thus doing a full resync of all data when the connection is re-established. However, these articles seem to mainly address Exchange 2003 and 2007. We are currently running Exchange 2010 SP2. Does this behavior continue to occur for Exchange 2010? Will upgrading to SP3 with all of the hotfixes afterwards help mitigate this issue?
SP1 breaks OWA ability to change options
After applying SP1, I cannot select the "All options". Doing so causes an IIS error as follows:
EventID: 4, source: MSExchange Control Panel
Current user: 'cwilliams'
Request for URL 'https://localhost/ecp/default.aspx?rfr=owa' failed with the following error:
System.TypeInitializationException: The type initializer for 'Microsoft.Exchange.Configuration.TenantMonitoring.TenantMonitor' threw an exception. ---> System.FormatException: Input string was not in a correct format.
at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info)
at System.Diagnostics.PerformanceCounterLib.GetStringTable(Boolean isHelp)
at System.Diagnostics.PerformanceCounterLib.get_NameTable()
at System.Diagnostics.PerformanceCounterLib.get_CategoryTable()
at System.Diagnostics.PerformanceCounterLib.CategoryExists(String machine, String category)
at System.Diagnostics.PerformanceCounterCategory.Exists(String categoryName, String machineName)
at Microsoft.Exchange.Configuration.TenantMonitoring.TenantMonitor..cctor()
--- End of inner exception stack trace ---
at Microsoft.Exchange.Configuration.TenantMonitoring.TenantMonitor.LogActivity(CounterType counterType, String organizationName)
at Microsoft.Exchange.Management.ControlPanel.RbacContext.CreateSession()
at Microsoft.Exchange.Management.ControlPanel.RbacSettings.CreateSession()
at Microsoft.Exchange.Management.ControlPanel.AuthenticationSettings..ctor(HttpContext context)
at Microsoft.Exchange.Management.ControlPanel.RbacModule.Application_PostAuthenticateRequest(Object sender, EventArgs e)
at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
System.FormatException: Input string was not in a correct format.
at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info)
at System.Diagnostics.PerformanceCounterLib.GetStringTable(Boolean isHelp)
at System.Diagnostics.PerformanceCounterLib.get_NameTable()
at System.Diagnostics.PerformanceCounterLib.get_CategoryTable()
at System.Diagnostics.PerformanceCounterLib.CategoryExists(String machine, String category)
at System.Diagnostics.PerformanceCounterCategory.Exists(String categoryName, String machineName)
at Microsoft.Exchange.Configuration.TenantMonitoring.TenantMonitor..cctor()
Rob
Outlook 2010 Problem opening shared mailbox "the set of folders cannot be opened. Microsoft Exchange is not available"
Hi, I have a number of mailboxes configured for sharing.
For those users who have full access rights (given via EMC) the mailboxes automatically appear in Outlook 2010.
However for one of those mailboxes the users recieve the following error when they try to access it:
"The Set of Folders cannot be opened. Microsoft Exchange is not available. Either there are network problems or the Exchange server is down for maintenance."
Meanwhile the users' primary mailboxes continue to work as normal, as do the other mailboxes that have been shared with them.
The output of get-mailboxpermissions for the problematic mailbox is the same as the output for a full working one.
If I add the mailbox to my account (as though I was using Outlook 2003) it allows me access, however I then have the situation of having the mailbox listed twice, one working the other not.
How do I get this mailbox to behave as expected?
Many thanks
Nick
suddenly stopped receiving mails on my iphone
All of a sudden, I stopped receiving mails on my iPhone 6s while I keep receiving normally all the mails on my laptop. All features of the my smart phone continue to function normally, yet when I try to get my mail, a pop up window shows the following message:"Cannot get mail, the connection to the server failed"
I tried to reinsert my password then I deleted the exchange account yet nothing happened and I received the message: "EXCHANGE ACCOUNT unable to verify account information"
What happened? What to do?
Ralph
Determining which Security Model is in use in Exchange Server 2010 installation ?
Hi,
Can anyone here please assist me in how to identify my Exchange Server 2010 SP2 security permission model in my single forest domain ?
Because I get confused myself here not being able to find the "Microsoft Exchange Security Groups" and also the "Organization Management" security group in my Active Directory Users & Computer console under my root domain.
My goal here is to identify the steps that I need to use to run setup.com /PrepareAD SP3 in my Schema Master domain controller.
Thanks.
/* Server Support Specialist */
Inbuilt Exchange 2010 Antispam and SCL Level
I have recently fall into a problem where my email messages are not behaving normal.
Now my important mails went into my junk mail.
I am not running any Edge Transport Server with my Exchange 2010. I read somewhere on the Microsoft site that by default settings, anti-spam features aren't enable.
On my previous mail received, when check the header of my email message, it says SCL is 0.
Now when i checked again, my exchange SCL is 9, which i believe it cause my good mails to go to my junk mail.
I am wondering how this has been automatically changed. How do I know if my antispam agent is turned on ?
What is the command I could used to change the scl or the view the scl threshold in exchange 2010.
Appreciate
----- bsl
exchange 2010/sp3 ru7 stopped outlook reminders
Setting up Exchange 2010 Impersonation for a group
I have an CRM router that needs a mailbox to impersonate several mailboxes. I do not want to give the mailbox in question impersonation rights to the entire store, but only to mailboxes in a specific AD group.
I am a novice at powershell and I want to make sure I've got the powershell commands correct.
AD group =Rock
By researching I've believe I need to create a New-Management scope and restrict it to the AD group Rock with the command:
New-ManagementScope -Name "RockManagementScope" -RecipientRestrictionFilter {MemberofGroup -eq "Rock"}
Now I can use this scope during the assignment of the ImpersonationRole:
New-ManagementRoleAssignment -Name:"RockImpersonation"
-User: userallowedtoimpersonate@myorg.gov -Role "Applicationimpersonation"
-CustomRecipientWriteScope: "RockManagementScope"
Am I correct this should allow the userallowedtoimpersonate@myorg.gov to ONLY impersonate a mailbox that owner is in the AD group Rock?
Thanks.
Exchange 2010 autodiscover issue
All-
I need more help. I have exchange 2010 up and running. Only when I'm on the network internally I'm having an issue connecting to exchange-when trying to set up any account in Outlook 2010 it says "an encrypted connection to your mail server is not available."
Oddly enough, if I connect to a network outside mine (coffee shop, neighbors WIFI, hotspot on phone) I can connect just fine. After the initial connection, it will work on my network as far as connecting to exchange just fine.
What am I missing here?
EDIT: It also doesn't work to set up the "unencrypted connection." When I type in the mail server name manually during setup (exchangeservername.domain.com) it works fine.
Setting Send Receive Limit
Hi All,
I want to give some chunk of users send/Receive Limit of 25 MB both internally and externally and limit my other users to 15 MB send/Receive Limit. I don't want to go to the properties of each user individually and set the limit there. How can I achieve this.
We have Exchange 2010 environment (2 Mbx servers and 1 hub/cas).For external mail delivery we are using Smart host. The setting on smart host for Send/Receive Limit is set to 25 MB.
I have set my Send/Receive Limit to 15 MB at organization level. I know if I can go to individual setting of these chunk of users I can increase the limit to 25 Mb but that will work only internally. I want it to work for both internal and external mails. How can I achieve this.
Any help will be Appreciated.
Thanks
EagleAsh
begin and endtime jump 1 hour after saving automatic reply in owa
When someone want to set their automatic reply from the web app the begin- and endtime change 1 hour ahead after saving.
So when they set the time at 14:00, after saving it changes to 15:00.
I have tried other browsers but the same thing keeps occurring. This only happens in the web app. Outlook works just fine.
If anyone knows a solution for this it would be great.
Exchange 2010 Database Copy Failed and Suspend
Exchange 2010 Database Copy Failed and Suspend
A source-side operation failed. Error Content indexing operation failed with the following message: The seeding operation encountered an error while trying to contact the search service. Error: Microsoft Exchange Search Service may not be running on server EXCH. Specific RPC error message: Error 0x6d9 (There are no more endpoints available from the
Exchange 2010 Routing Group Connector Creation and Introduction
I have both Exchange 2003 and Exchange 2010 Server in my test lab. Now i want to Creae a routing group connector from Exchange 2010 Server is it possible?
I also need some overview of Exchange 2010 Routing Group Connector.
Can i edit the properties of Exchange 2010 Routing Group Connector from Exchange 2003 System Manager.
Sincerly,
TechGuy.
Exchange restores do not show up in disconnected mailboxes
I am testing set of back up tapes and did a restore of my mail stores using the following method:
Create recovery database:
new-mailboxdatabase -Recovery -Name Restore002 -Server ServerName -EdbFilePath "G:\Restore\Database\Restore002.edb" -LogFolderPath "G:\Restore\Logs"
Restored using backup exec 2010 to the server and the Restore002 mail store
After the restore completes EMC mounts the database but the mailboxes in that restore never show up in the disconnected mailboxes. The only changes to my system was an upgrade to SP3 for exchange but I don't think that changes restore procedures.
Any help would be appreciated.