Quantcast
Channel: Exchange Server 2010 forum
Viewing all 19214 articles
Browse latest View live

Copying Calendar events between calendars issue

$
0
0

One of the departments in my organization runs 4 different shared calendars. We run exchange 2013 and Outlook 2013. All 4 mailboxes are on the same DB and located at the same site. All users run Outlook in Cached mode, it is a GPO setting and cannot be changed by users.

For reference, I will call the mailboxes A, B, C, and D.  The issue we are having is this, They can copy\drag events from A to B, and from B to A.  They can copy from C to D and from D to C.  They cannot copy from A or B to C or D, and they cannot copy from C or D to A or B.  The error received is "Cannot copy the items.  Changes made to the item were lost due to a reconnect with the server."

I have combed through permissions In Exchange, AD, and Outlook, I have compared properties in Exchange and AD, I have made sure that I have full control, I have made myself owner of all 4 calendars, nothing works and there is nothing that stands out that would cause this.

I performed further tests with 3 more shared calendars I have access to, we will call them E, F, and G.  I am able to copy between C, D, E, F, and G from any of those to any of those, but I cannot copy from any of those to A or B, and I cannot transfer from A or B to any of the other 5.

More investigating and digging to try to find any differences or similarities between all 7 calendars and still unable to find any smoking guns.

Last bit of testing, I decided to see how all 7 would interact with my own calendar.  I can freely copy from my calendar to all 7 shared calendars, and from all 7 shared calendars to my own calendar.

At this point, I am at the end of my rope, I have no clue why A, and B will not play with any of the other shared calendars.  If anyone has any ideas, please let me know.  Really appreciate any help I can get on this.


OH, one last thing, all the tests above are trying to drag and drop, or copy and paste.  I am able to Shift\drag from A and B to any of the other calendars, and from any of the others to A and B.  That moves the event though, the need to be able to copy the event.

lack listed in BACKSCATTERER,

$
0
0

Hi all,

i havbe been black listed in BACKSCATTERER,

my email server when receiving mails from SPAM ,the posmaster sends mails again to the sender and the mail is queued in the server 

because it is trying to send it so I close the email and choose cancel without sending a NDR report.

so as a quick solution I disabled nondelivery report for remote domains 

what should I do 

free busy and OOF not working on outlook -exchange 2010

$
0
0

i

i have exchange 2010.

few weeks ago the free\busy and OOF stop working.

when checking "default" user permissions, found that it is set to "NONE"

tried to change it with "set-mailboxfolderpermission" but the command is run sucessfully and no change has been made..

tried to remove and recreate "default" but default and anonymus users cannot be removed.

tried to add new universal group with AvilabilityOnly, the group added with the right permission but no change.

fixed the certificate and verify the comupter see it as proper.

tried to change the "default" permission manually, still no luck.

new user get "default" permission as  AvilabilityOnly and working fine.

all users can see free\buy and OOF from OWA......

PLEASE HELP...

ANY IDEAS????

thanks

itzik


www.globalex.co.il

receiving many mails from a remote domain that is not black listed in a short period

$
0
0

hi all,

I receive a lot of emails in a short period from a non blackisted ip but it has no Mx record I blocked that IP in my kasperesky antispam .

how to prevent this action and protect my email server from such behavior .

Exchange 2013 Upgrade issue (from 2010) in Hybrid Mode

$
0
0

I'm trying to do a swing upgrade of Exchange 2010 to Exchange 2019 but my Exchange 2013 (on a VM with Windows 2012) is failing at the hybrid configuration stage after I enter my admin username and password for Office 365:

I've looked around at different advice. The Hybrid Configuration works (it didn't under Exchange 2010) using the same credentials.

Do I need a version other than CU22 to get this working?

Tim


Issue creating a rule to have emails go to the Public Folder in Exchange

$
0
0
Hi when I try to create a rule to have emails go to the public folder it says in Microsoft Outlook "Network problems are preventing connection to Microsoft Exchange."

Groupwise 8 to Exchange 2010 Migration Tools

$
0
0

Greetings All,

I am about to embark on a Groupwise 8 to Exchange 2010 migration and need advice regarding tools.

So far I have looked into Quest and Messaging Architects and have found that both require some kind of training, certification or professional services commitment. I just want a tool that I can buy and run myself without committing to anything from the vendor. Can anyone recommend a migration tool that may suit?

Regards,

PK


Can't upgrade to Exchange 2010 SPx without hotfix 977624 and 977592 - but they are no longer available.

$
0
0

Hello,

I'm trying to upgrade my Exchange 2010 install to SP3 so I can migrate it to Exchange 2013 on another server.

It's currently installed on a Windows 2008 SP2 Server, which is up to date with updates.

When Exchange does the 'Prerequisites check' I get the following errors...

Error:
This computer requires the update described in Microsoft Knowledge Base articles 977624 (http://support.microsoft.com/?kbid=977624). Without this update, the RMS features may stop working.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp

Error:
This computer requires the update described in Microsoft Knowledge Base article KB977592 (http://go.microsoft.com/fwlink/?LinkId=194843). Without this update, the Outlook Anywhere feature may work unreliably.
Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=249bbd89-16b4-4efa-9b66-7ec87f90e44c

The Microsoft page for Prerequisites - https://docs.microsoft.com/en-us/previous-versions/office/exchange-server-2010/bb691354(v=exchg.141) - also says these are required. But the pages do not exist anymore.

However - this link - https://support.microsoft.com/en-us/help/4343220/this-hotfix-is-no-longer-available - says the hotfix is no longer is available and to get it from regular updates. The server is up to date.

I've run the latest roll up for Exchange 2008 RTM (roll up 5). Still I get the above errors.

So I can't upgrade which means i can't migrate. I'm stuck.

Also, I know this sounds like an Exchange issue, but the hotfixes I require are for Windows Server.

Any help appreciated.



OLM to PST? Calendar?

$
0
0

Hi all,

 

Is it posible to convert an Outlook 2011 Export(*.OLM).
To a Windows Outlook/Exchange supported file.

I need to export a Calendar from a Entourage pop account.
to a Exchange 2010, Outlook 2011 config. The Agenda needs to be available in the Exchange web interface.

 

So I need to import it to exchange.

 

I need help! pleasee!!!!!

Email Queue when the user mailbox is full

$
0
0

Hi,

we are currently running exchange 2010. Is there a way that we can keep the mails in queue rather than rejecting them for users whose mailbox is full ???

if yes can anyone let me know the process how to do it ?

Thanks

Re-IP Exchange and Hybrid

$
0
0

We're an O365 customer, but have a hybrid Exchange environment. We have an older Exchange 2010 server, that I am about to take down, and an Exchange Hybrid server.  There are no user mailboxes left on the servers nor public folders; all have been migrated to O365. Mostly we're using them for email management of users and we have some SMTP connections running thru them from other servers. 

We have a project to re-IP all of our servers, including these two. I've culled thru my DNS servers, the firewalls, the Exchange servers themselves, our email filtering system and O365 rules looking for places that reference the old IPs and I think I've found them all.  What we've done with other servers(All are virtual, BTW), is to add in a second NIC and let them get a DHCP IP address so that the servers have two IPs now. After DNS has percolated everywhere, we'll go in and make the new IP static and disable the old NIC. 

I'd like to do something similar with these two servers.  Give them new NICs with new IPs, leaving the current IP's in place. Then after everything looks good, go thru the DNS settings , MX record, and firewall and make ,the changes to point these items to the new IP.  After letting that sit, I'd disable the old NICs and we'd be using the new IPs.

Does this sound like it should work?

Can't see my colleague's shared calendar in Outlook

$
0
0

Hello,

 

I cannot see my colleague's shared calendar. We are all connected to our Exchange 2010 server and are using Outlook 2010. It was working a few weeks ago and all other colleagues can see his calendar. I can also see it, but only on Outlook Web Access. When I try Outlook, it gives me a 'no connection' error in the calendar tab when trying to connect. All other colleagues' calendars are ok with my Outlook, just this one. Any suggestions would help since we cannot effectively plan appointments together now.

Regards

Jacob

Cannot move system mailbox and delete the database

$
0
0

Hi ,

I have a exchange 2010 environment, 2 DB servers and 1 HUBCAS server. Before we had a single DB named DB01 and the size was growing around 350 gb.I decided to split the Databases in two DBs and created 2 databases DB02 and DB-03.

When it came to move the System Mail boxes I ran command

>Get-Mailbox -Database DB01 -Arbitration | ft -wrap –auto

  The output was 3 system mailboxes result below

Name                                               Alias                                              ServerName  ProhibitSendQuota

----                                               -----                                              ----------  -----------------

SystemMailbox{1f05a927-f6dd-483a-9507-dad7ad1d0228} SystemMailbox{1f05a927-f6dd-483a-9507-dad7ad1d0228} exchmbxsrv1 unlimited

SystemMailbox{e0dc1c29-89c3-4034-b678-e6c29d823ed9} SystemMailbox{e0dc1c29-89c3-4034-b678-e6c29d823ed9} exchmbxsrv1 unlimited

FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042 FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042 exchmbxsrv1 1 MB (1,048,576 bytes)

I moved them to DB02. And cleared the move request.

I ran command to see that the system mailboxes are on DB02 and they were there.

To make sure the DB 01 is empty I ran the command

Get-MailboxDatabase "db01" | Get-Mailbox

Result = there were no mailboxes but when I ran command

Get-MailboxStatistics -Database "Db01" | fl

It showed me that there is one more system mailbox present on this DB

please check Output 1

I tried to move this to 2<sup>nd</sup> db , but cant as it throws the error listed below.

Please Check Output 2

I have removed the copy of this database from DAG and currently it is dismounted and everything is running normal.

My question is what is this mailbox as far as I know there are only three and they are residing on other DB .

I want to delete this DB but I am hesitant to do so as it still shows that there is this mailbox there.

I check in AD with tool ADSI edit and can’t find this Mailbox there.

How to get rid of this Mailbox and is it safe to delete this database.


EagleAsh

how I can find my email

Exchange 2010 - turn Winmail.dat off

$
0
0
 

 Hi,

 I guess you have had this question before but I would like to be quit sure if this is ok or not.

 If I 

Get-RemoteDomain | Where {$_.TNEFEnabled -ne $false} and

Set-RemoteDomain -Identity Default -TNEFEnabled $false

I have also seen

  1. Open Organization Configuration and then Hub Transport.
  2. Open Remote Domains.
  3. Select Properties:
  4. Hub Transport - Remote Domains - Message Format-never use Exchange rich-text format.

I just want be sure that I do not get any new problems when I turn this off.

thanks,

 


How to show actual meeting in user's shared mailbox

$
0
0
We have a mailbox created for Webex and it is a shared mailbox that users can schedule a webex meeting. It shows busy on the calendar. But, the user wants the actual meeting name to be visible on this and not show busy. I am trying to see how I can do this. In regular room mailboxes (to reserve conf rooms etc.) it shows on the calendar the meeting agenda or actual meeting information. But, in this case it does not show and it shows only "BUSY". How can I change the settings in Exchange Mailbox to have the information show up for users. Again this is a SHARED MAILBOX.

AA2913


Outlook iOS app & on-prem Exchange

$
0
0

I've been using the outlook app on iOS for several years with our Exchange 2013 farm.  I recently had an issue and in trying to re-add my account to Outlook iOS, I am being pushed over to the Authenticator app to authenticate.  Problem is we don't have 2FA enabled with our Exchange services and there is no matching account for me to authenticate to. If I don't authenticate the process never completes.



\\Greg

OLM to PST? Calendar?

$
0
0

Hi all,

 

Is it posible to convert an Outlook 2011 Export(*.OLM).
To a Windows Outlook/Exchange supported file.

I need to export a Calendar from a Entourage pop account.
to a Exchange 2010, Outlook 2011 config. The Agenda needs to be available in the Exchange web interface.

 

So I need to import it to exchange.

 

I need help! pleasee!!!!!

Migrate from Zimbra to Exchange 2010

$
0
0
I have Zimbra 6.0 and want to move to Exchange 2010 any way to move users and mailboxes.  Zimbra makes it real easy to do other way around has any one found a solution to do it this way.

Exchange 2010 Initialization failed: The WinRM client received an HTTP server error status 500

$
0
0

Good morning,

I have major problems with exchange 2010 this morning.

First off, exchange stopped sending and receiving any emails- whether internal or external. We are running a server 2008 R2 domain and exchange 2010 is installed on a Server 2008 virtual machine.
I tried simply rebooting the server and then tried logging on and getting into the Exchange Management Console. I receive the following error in the exchange management console:

Initialization failed

The following error occurred while attempting to connect to the specified Exchange server 'exchangesvr.chs.internal';

The attempt to connect to http://exchangesvr.chs.internal/Powershell using "Kerberos" authentication failed: Connecting to remote server failed with the following error message: The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information, see the about_Remote_Troubleshooting Help topic.

I followed the steps listed here: http://technet.microsoft.com/en-us/library/ff607221(EXCHG.80).aspx
but everything appeared to be correct. I did not have to make any changes because everything was set as it should be according to that information.

Any help would be much appreciated.

Best regards

Katrina

Viewing all 19214 articles
Browse latest View live


Latest Images

<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>